fix: verify SSH host keys, support ssh-agent, fix remote dir walk bugs

- Replace ssh.InsecureIgnoreHostKey() with TOFU verification against
  ~/.ssh/known_hosts (accept-new for unknown hosts, hard reject on a
  changed key) to close a MITM hole on every SFTP connection.
- Actually connect to a running ssh-agent (SSH_AUTH_SOCK) for auth
  instead of only scanning default key files on disk; give a clear
  error when an explicit IdentityFile is passphrase-protected.
- Fix SSHClient.walk()/DirectorySize: the internal filepathSkipDir
  sentinel leaked out as a real error on stat/ReadDir failures instead
  of being swallowed, aborting size calculation on the first
  unreadable subdirectory instead of skipping it.
- Skip symlink-to-directory entries in remote directory copies instead
  of failing the whole transfer trying to Open() them as regular files.
- Consolidate 5 duplicated sudo-aware home-dir lookups into
  internal/homedir, adding a missing os.Geteuid()==0 check before
  trusting SUDO_USER.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

go.mod

@@ -4,18 +4,20 @@ go 1.26.0
 
 require (
 	github.com/alecthomas/chroma/v2 v2.23.1
+	github.com/atotto/clipboard v0.1.4
 	github.com/charmbracelet/bubbles v0.21.0
 	github.com/charmbracelet/bubbletea v1.3.10
 	github.com/charmbracelet/lipgloss v1.1.0
+	github.com/charmbracelet/x/ansi v0.10.1
 	github.com/pelletier/go-toml/v2 v2.2.4
+	github.com/pkg/sftp v1.13.10
+	golang.org/x/crypto v0.50.0
 	golang.org/x/sys v0.43.0
 )
 
 require (
-	github.com/atotto/clipboard v0.1.4 // indirect
 	github.com/aymanbagabas/go-osc52/v2 v2.0.1 // indirect
 	github.com/charmbracelet/colorprofile v0.2.3-0.20250311203215-f60798e515dc // indirect
-	github.com/charmbracelet/x/ansi v0.10.1 // indirect
 	github.com/charmbracelet/x/cellbuf v0.0.13-0.20250311204145-2c3ea96c31dd // indirect
 	github.com/charmbracelet/x/term v0.2.1 // indirect
 	github.com/dlclark/regexp2 v1.11.5 // indirect
@@ -28,9 +30,7 @@ require (
 	github.com/muesli/ansi v0.0.0-20230316100256-276c6243b2f6 // indirect
 	github.com/muesli/cancelreader v0.2.2 // indirect
 	github.com/muesli/termenv v0.16.0 // indirect
-	github.com/pkg/sftp v1.13.10 // indirect
 	github.com/rivo/uniseg v0.4.7 // indirect
 	github.com/xo/terminfo v0.0.0-20220910002029-abceb7e1c41e // indirect
-	golang.org/x/crypto v0.50.0 // indirect
 	golang.org/x/text v0.36.0 // indirect
 )

go.sum

@@ -1,5 +1,9 @@
+github.com/alecthomas/assert/v2 v2.11.0 h1:2Q9r3ki8+JYXvGsDyBXwH3LcJ+WK5D0gc5E8vS6K3D0=
+github.com/alecthomas/assert/v2 v2.11.0/go.mod h1:Bze95FyfUr7x34QZrjL+XP+0qgp/zg8yS+TtBj1WA3k=
 github.com/alecthomas/chroma/v2 v2.23.1 h1:nv2AVZdTyClGbVQkIzlDm/rnhk1E9bU9nXwmZ/Vk/iY=
 github.com/alecthomas/chroma/v2 v2.23.1/go.mod h1:NqVhfBR0lte5Ouh3DcthuUCTUpDC9cxBOfyMbMQPs3o=
+github.com/alecthomas/repr v0.5.2 h1:SU73FTI9D1P5UNtvseffFSGmdNci/O6RsqzeXJtP0Qs=
+github.com/alecthomas/repr v0.5.2/go.mod h1:Fr0507jx4eOXV7AlPV6AVZLYrLIuIeSOWtW57eE/O/4=
 github.com/atotto/clipboard v0.1.4 h1:EH0zSVneZPSuFR11BlR9YppQTVDbh5+16AmcJi4g1z4=
 github.com/atotto/clipboard v0.1.4/go.mod h1:ZY9tmq7sm5xIbd9bOK4onWV4S6X0u6GY7Vn0Yu86PYI=
 github.com/aymanbagabas/go-osc52/v2 v2.0.1 h1:HwpRHbFMcZLEVr42D4p7XBqjyuxQH5SMiErDT4WkJ2k=
@@ -18,10 +22,14 @@ github.com/charmbracelet/x/cellbuf v0.0.13-0.20250311204145-2c3ea96c31dd h1:vy0G
 github.com/charmbracelet/x/cellbuf v0.0.13-0.20250311204145-2c3ea96c31dd/go.mod h1:xe0nKWGd3eJgtqZRaN9RjMtK7xUYchjzPr7q6kcvCCs=
 github.com/charmbracelet/x/term v0.2.1 h1:AQeHeLZ1OqSXhrAWpYUtZyX1T3zVxfpZuEQMIQaGIAQ=
 github.com/charmbracelet/x/term v0.2.1/go.mod h1:oQ4enTYFV7QN4m0i9mzHrViD7TQKvNEEkHUMCmsxdUg=
+github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
+github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dlclark/regexp2 v1.11.5 h1:Q/sSnsKerHeCkc/jSTNq1oCm7KiVgUMZRDUoRu0JQZQ=
 github.com/dlclark/regexp2 v1.11.5/go.mod h1:DHkYz0B9wPfa6wondMfaivmHpzrQ3v9q8cnmRbL6yW8=
 github.com/erikgeiser/coninput v0.0.0-20211004153227-1c3628e74d0f h1:Y/CXytFA4m6baUTXGLOoWe4PQhGxaX0KpnayAqC48p4=
 github.com/erikgeiser/coninput v0.0.0-20211004153227-1c3628e74d0f/go.mod h1:vw97MGsxSvLiUE2X8qFplwetxpGLQrlU1Q9AUEIzCaM=
+github.com/hexops/gotextdiff v1.0.3 h1:gitA9+qJrrTCsiCl7+kh75nPqQt1cx4ZkudSTLoUqJM=
+github.com/hexops/gotextdiff v1.0.3/go.mod h1:pSWU5MAI3yDq+fZBTazCSJysOMbxWL1BSow5/V2vxeg=
 github.com/kr/fs v0.1.0 h1:Jskdu9ieNAYnjxsi0LbQp1ulIKZV1LAFgK1tWhpZgl8=
 github.com/kr/fs v0.1.0/go.mod h1:FFnZGqtBN9Gxj7eW1uZ42v5BccTP0vu6NEaFoC2HwRg=
 github.com/lucasb-eyer/go-colorful v1.2.0 h1:1nnpGOrhyZZuNyfu1QjKiUICQ74+3FNCN69Aj6K7nkY=
@@ -42,9 +50,13 @@ github.com/pelletier/go-toml/v2 v2.2.4 h1:mye9XuhQ6gvn5h28+VilKrrPoQVanw5PMw/TB0
 github.com/pelletier/go-toml/v2 v2.2.4/go.mod h1:2gIqNv+qfxSVS7cM2xJQKtLSTLUE9V8t9Stt+h56mCY=
 github.com/pkg/sftp v1.13.10 h1:+5FbKNTe5Z9aspU88DPIKJ9z2KZoaGCu6Sr6kKR/5mU=
 github.com/pkg/sftp v1.13.10/go.mod h1:bJ1a7uDhrX/4OII+agvy28lzRvQrmIQuaHrcI1HbeGA=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
+github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
 github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=
 github.com/rivo/uniseg v0.4.7 h1:WUdvkW8uEhrYfLC4ZzdpI2ztxP1I582+49Oc5Mq64VQ=
 github.com/rivo/uniseg v0.4.7/go.mod h1:FN3SvrM+Zdj16jyLfmOkMNblXMcoc8DfTHruCPUcx88=
+github.com/stretchr/testify v1.10.0 h1:Xv5erBjTwe/5IxqUQTdXv5kgmIvbHo3QQyRwhJsOfJA=
+github.com/stretchr/testify v1.10.0/go.mod h1:r2ic/lqez/lEtzL7wO/rwa5dbSLXVDPFyf8C91i36aY=
 github.com/xo/terminfo v0.0.0-20220910002029-abceb7e1c41e h1:JVG44RsyaB9T2KIHavMF/ppJZNG9ZpyihvCd0w101no=
 github.com/xo/terminfo v0.0.0-20220910002029-abceb7e1c41e/go.mod h1:RbqR21r5mrJuqunuUZ/Dhy/avygyECGrLceyNeo4LiM=
 golang.org/x/crypto v0.50.0 h1:zO47/JPrL6vsNkINmLoo/PH1gcxpls50DNogFvB5ZGI=
@@ -53,11 +65,11 @@ golang.org/x/exp v0.0.0-20220909182711-5c715a9e8561 h1:MDc5xs78ZrZr3HMQugiXOAkSZ
 golang.org/x/exp v0.0.0-20220909182711-5c715a9e8561/go.mod h1:cyybsKvd6eL0RnXn6p/Grxp8F5bW7iYuBgsNCOHpMYE=
 golang.org/x/sys v0.0.0-20210809222454-d867a43fc93e/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.38.0 h1:3yZWxaJjBmCWXqhN1qh02AkOnCQ1poK6oF+a7xWL6Gc=
-golang.org/x/sys v0.38.0/go.mod h1:OgkHotnGiDImocRcuBABYBEXf8A9a87e/uXjp9XT3ks=
 golang.org/x/sys v0.43.0 h1:Rlag2XtaFTxp19wS8MXlJwTvoh8ArU6ezoyFsMyCTNI=
 golang.org/x/sys v0.43.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw=
-golang.org/x/text v0.3.8 h1:nAL+RVCQ9uMn3vJZbV+MRnydTJFPf8qqY42YiA6MrqY=
+golang.org/x/term v0.42.0 h1:UiKe+zDFmJobeJ5ggPwOshJIVt6/Ft0rcfrXZDLWAWY=
-golang.org/x/text v0.3.8/go.mod h1:E6s5w1FMmriuDzIBO73fBruAKo1PCIq6d2Q6DHfQ8WQ=
+golang.org/x/term v0.42.0/go.mod h1:Dq/D+snpsbazcBG5+F9Q1n2rXV8Ma+71xEjTRufARgY=
 golang.org/x/text v0.36.0 h1:JfKh3XmcRPqZPKevfXVpI1wXPTqbkE5f7JA92a55Yxg=
 golang.org/x/text v0.36.0/go.mod h1:NIdBknypM8iqVmPiuco0Dh6P5Jcdk8lJL0CUebqK164=
+gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
+gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

internal/config/config.go

@@ -9,6 +9,8 @@ import (
 	"syscall"
 
 	toml "github.com/pelletier/go-toml/v2"
+
+	"vcom/internal/homedir"
 )
 
 type Config struct {
@@ -221,9 +223,9 @@ func resolvePath(explicitPath string) (string, bool, error) {
 	if explicitPath != "" {
 		candidates = append(candidates, explicitPath)
 	} else {
-		homeDir, err := os.UserHomeDir()
+		homeDir := homedir.Dir()
-		if err != nil {
+		if homeDir == "" {
-			return "", false, fmt.Errorf("resolve home dir: %w", err)
+			return "", false, fmt.Errorf("cannot determine home directory")
 		}
 		xdgDir := os.Getenv("XDG_CONFIG_HOME")
 		if xdgDir == "" {
@@ -261,9 +263,9 @@ func isMissingPathError(err error) bool {
 }
 
 func DefaultUserPath() (string, error) {
-	homeDir, err := os.UserHomeDir()
+	homeDir := homedir.Dir()
-	if err != nil {
+	if homeDir == "" {
-		return "", fmt.Errorf("resolve home dir: %w", err)
+		return "", fmt.Errorf("cannot determine home directory")
 	}
 	xdgDir := os.Getenv("XDG_CONFIG_HOME")
 	if xdgDir == "" {

internal/config/session.go

@@ -6,6 +6,8 @@ import (
 	"path/filepath"
 
 	toml "github.com/pelletier/go-toml/v2"
+
+	"vcom/internal/homedir"
 )
 
 // SessionState stores the UI state that should be restored on next launch.
@@ -24,9 +26,9 @@ type PaneSession struct {
 
 // DefaultSessionPath returns the path to the session file.
 func DefaultSessionPath() (string, error) {
-	homeDir, err := os.UserHomeDir()
+	homeDir := homedir.Dir()
-	if err != nil {
+	if homeDir == "" {
-		return "", fmt.Errorf("resolve home dir: %w", err)
+		return "", fmt.Errorf("cannot determine home directory")
 	}
 	xdgDir := os.Getenv("XDG_CONFIG_HOME")
 	if xdgDir == "" {

internal/fs/ops.go

@@ -10,6 +10,8 @@ import (
 	"path/filepath"
 	"syscall"
 	"time"
+
+	"vcom/internal/homedir"
 )
 
 type TransferStats struct {
@@ -261,9 +263,9 @@ func DeletePath(path string) error {
 //   - A .trashinfo file is written to Trash/info/<basename>.trashinfo
 //   - If <basename> already exists in Trash/files, a numeric suffix is appended.
 func MoveToTrash(path string) error {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
-		return fmt.Errorf("cannot determine home directory: %w", err)
+		return fmt.Errorf("cannot determine home directory")
 	}
 
 	trashDir := filepath.Join(home, ".local", "share", "Trash")

internal/fs/remote/client.go

@@ -3,6 +3,7 @@ package remote
 import (
 	"bufio"
 	"context"
+	"errors"
 	"fmt"
 	"io"
 	"net"
@@ -15,6 +16,10 @@ import (
 
 	"github.com/pkg/sftp"
 	"golang.org/x/crypto/ssh"
+	"golang.org/x/crypto/ssh/agent"
+	"golang.org/x/crypto/ssh/knownhosts"
+
+	"vcom/internal/homedir"
 )
 
 // SSHClient wraps an SSH connection and SFTP client for remote filesystem access.
@@ -37,6 +42,11 @@ func Connect(host SSHHost) (*SSHClient, error) {
 		return nil, fmt.Errorf("ssh auth: %w", err)
 	}
 
+	hostKeyCB, err := tofuHostKeyCallback()
+	if err != nil {
+		return nil, fmt.Errorf("host key verification: %w", err)
+	}
+
 	user := host.User
 	if user == "" {
 		user = os.Getenv("USER")
@@ -45,7 +55,7 @@ func Connect(host SSHHost) (*SSHClient, error) {
 	config := &ssh.ClientConfig{
 		User:            user,
 		Auth:            authMethods,
-		HostKeyCallback: ssh.InsecureIgnoreHostKey(), // TODO: support known_hosts verification
+		HostKeyCallback: hostKeyCB,
 		Timeout:         15 * time.Second,
 	}
 
@@ -91,23 +101,101 @@ func Connect(host SSHHost) (*SSHClient, error) {
 	return client, nil
 }
 
+// tofuHostKeyCallback returns a HostKeyCallback that verifies server host keys
+// against ~/.ssh/known_hosts. Unknown hosts are trusted on first use (TOFU,
+// matching `ssh -o StrictHostKeyChecking=accept-new`) and their key is
+// recorded for future connections. A host whose key no longer matches a
+// previously recorded entry is rejected outright, since that's the signature
+// of a man-in-the-middle attack or a legitimately reissued key that the user
+// must verify and update manually (e.g. via `ssh-keygen -R <host>`).
+func tofuHostKeyCallback() (ssh.HostKeyCallback, error) {
+	khPath := KnownHostsPath()
+	if khPath == "" {
+		return nil, fmt.Errorf("cannot determine known_hosts path")
+	}
+
+	if err := os.MkdirAll(filepath.Dir(khPath), 0o700); err != nil {
+		return nil, fmt.Errorf("create ssh dir: %w", err)
+	}
+	if _, err := os.Stat(khPath); os.IsNotExist(err) {
+		f, err := os.OpenFile(khPath, os.O_CREATE|os.O_WRONLY, 0o600)
+		if err != nil {
+			return nil, fmt.Errorf("create known_hosts: %w", err)
+		}
+		f.Close()
+	}
+
+	verify, err := knownhosts.New(khPath)
+	if err != nil {
+		return nil, fmt.Errorf("parse known_hosts: %w", err)
+	}
+
+	return func(hostname string, remote net.Addr, key ssh.PublicKey) error {
+		err := verify(hostname, remote, key)
+		if err == nil {
+			return nil
+		}
+
+		var keyErr *knownhosts.KeyError
+		if errors.As(err, &keyErr) && len(keyErr.Want) > 0 {
+			return fmt.Errorf("REMOTE HOST IDENTIFICATION HAS CHANGED for %s! This may indicate a man-in-the-middle attack, or the server's key was legitimately reissued. Refusing to connect; run `ssh-keygen -R %s` to remove the stale entry once you've verified the new key: %w", hostname, hostname, err)
+		}
+
+		// Unknown host: trust on first use and remember the key.
+		line := knownhosts.Line([]string{knownhosts.Normalize(hostname)}, key)
+		f, ferr := os.OpenFile(khPath, os.O_APPEND|os.O_CREATE|os.O_WRONLY, 0o600)
+		if ferr != nil {
+			return fmt.Errorf("cannot save host key for %s: %w", hostname, ferr)
+		}
+		defer f.Close()
+		if _, werr := f.WriteString(line + "\n"); werr != nil {
+			return fmt.Errorf("cannot save host key for %s: %w", hostname, werr)
+		}
+		return nil
+	}, nil
+}
+
+// sshAgentAuth connects to the running ssh-agent (via SSH_AUTH_SOCK) and
+// returns an auth method backed by its loaded keys, or false if no agent is
+// reachable. The agent connection is intentionally kept open for the life of
+// the process rather than closed here: ssh.PublicKeysCallback invokes the
+// callback lazily during the handshake, well after this function returns.
+func sshAgentAuth() (ssh.AuthMethod, bool) {
+	sock := os.Getenv("SSH_AUTH_SOCK")
+	if sock == "" {
+		return nil, false
+	}
+	conn, err := net.Dial("unix", sock)
+	if err != nil {
+		return nil, false
+	}
+	agentClient := agent.NewClient(conn)
+	return ssh.PublicKeysCallback(agentClient.Signers), true
+}
+
 // authMethodsForHost returns the appropriate SSH auth methods for the given host.
 // For SSH config hosts with IdentityFile, it uses public key authentication.
 // For custom hosts with a password, it uses password authentication.
 func authMethodsForHost(host SSHHost) ([]ssh.AuthMethod, error) {
 	var methods []ssh.AuthMethod
+	var passphraseProtectedKey string
 
-	// Try key-based auth if identity file is specified
+	// Try key-based auth if identity file is specified.
 	if host.IdentityFile != "" {
 		key, err := os.ReadFile(host.IdentityFile)
 		if err == nil {
-			signer, err := ssh.ParsePrivateKey(key)
+			signer, perr := ssh.ParsePrivateKey(key)
-			if err == nil {
+			var passphraseErr *ssh.PassphraseMissingError
+			if perr == nil {
 				methods = append(methods, ssh.PublicKeys(signer))
-			} else {
+			} else if errors.As(perr, &passphraseErr) {
-				// If the key is encrypted, try with empty passphrase or common ones
+				// The key is encrypted. We have no interactive prompt for a
-				// For simplicity, we try without passphrase first
+				// passphrase yet, but the same key may already be unlocked
-				// In a real implementation, we might prompt for a passphrase
+				// in a running ssh-agent, so fall through and try that too.
+				passphraseProtectedKey = host.IdentityFile
+				if authMethod, ok := sshAgentAuth(); ok {
+					methods = append(methods, authMethod)
+				}
 			}
 		}
 	}
@@ -130,13 +218,16 @@ func authMethodsForHost(host SSHHost) ([]ssh.AuthMethod, error) {
 		))
 	}
 
-	// Always try default SSH agent and default keys as a last resort
+	// When no explicit identity file or password is configured, try the
-	// This covers the case where the user has an SSH agent running with loaded keys
+	// running ssh-agent first (it can supply already-decrypted keys that a
-	// but no IdentityFile is specified in the config.
+	// bare file scan cannot), then fall back to scanning default key paths.
 	if host.IdentityFile == "" && host.Password == "" {
-		// Add default key paths
+		if authMethod, ok := sshAgentAuth(); ok {
-		home, err := os.UserHomeDir()
+			methods = append(methods, authMethod)
-		if err == nil {
+		}
+
+		home := homedir.Dir()
+		if home != "" {
 			defaultKeys := []string{
 				home + "/.ssh/id_rsa",
 				home + "/.ssh/id_ed25519",
@@ -156,6 +247,9 @@ func authMethodsForHost(host SSHHost) ([]ssh.AuthMethod, error) {
 	}
 
 	if len(methods) == 0 {
+		if passphraseProtectedKey != "" {
+			return nil, fmt.Errorf("identity file %q is passphrase-protected; load it into ssh-agent first (ssh-add %s)", passphraseProtectedKey, passphraseProtectedKey)
+		}
 		return nil, fmt.Errorf("no authentication methods available for host %q", host.Name)
 	}
 
@@ -557,6 +651,12 @@ func (c *SSHClient) copyDirFromRemote(remoteDir, localDir string, onFile func(pa
 		if info.IsDir() {
 			return os.MkdirAll(localPath, 0o755)
 		}
+		if isSymlinkToDir(c, remotePath, info) {
+			// Copying/dereferencing a symlinked directory isn't supported;
+			// skip it instead of failing the whole transfer trying to Open()
+			// what the SFTP server sees as a directory.
+			return nil
+		}
 		if err := c.CopyFileFromRemote(remotePath, localPath); err != nil {
 			return err
 		}
@@ -628,6 +728,11 @@ func copyDirBetweenRemotes(srcClient, dstClient *SSHClient, srcDir, dstDir strin
 		if info.IsDir() {
 			return dstClient.MkdirAll(dstPath)
 		}
+		if isSymlinkToDir(srcClient, remotePath, info) {
+			// See copyDirFromRemote: a symlink-to-directory can't be opened
+			// as a regular file, so skip it instead of aborting the transfer.
+			return nil
+		}
 		if err := CopyFileBetweenRemotes(srcClient, dstClient, remotePath, dstPath); err != nil {
 			return err
 		}
@@ -654,10 +759,13 @@ func (c *SSHClient) Walk(root string, walkFn walkFunc) error {
 
 func (c *SSHClient) walk(dirPath string, walkFn walkFunc, info os.FileInfo) error {
 	if info == nil {
-		var err error
+		var statErr error
-		info, err = c.sftpCli.Stat(dirPath)
+		info, statErr = c.sftpCli.Stat(dirPath)
-		if err != nil {
+		if statErr != nil {
-			return walkFn(dirPath, nil, err)
+			if fnErr := walkFn(dirPath, nil, statErr); fnErr != nil && fnErr != filepathSkipDir {
+				return fnErr
+			}
+			return nil
 		}
 	}
 
@@ -673,11 +781,22 @@ func (c *SSHClient) walk(dirPath string, walkFn walkFunc, info os.FileInfo) erro
 		return nil
 	}
 
-	entries, err := c.sftpCli.ReadDir(dirPath)
+	entries, readErr := c.sftpCli.ReadDir(dirPath)
-	if err != nil {
+	if readErr != nil {
-		return walkFn(dirPath, info, err)
+		// Report the error but allow walkFn to skip this directory
+		// (returns nil, or filepathSkipDir → continue) or abort (returns
+		// another error → stop). Either way this directory's subtree is done.
+		if fnErr := walkFn(dirPath, info, readErr); fnErr != nil && fnErr != filepathSkipDir {
+			return fnErr
+		}
+		return nil
 	}
 
+	// Note: entries for symlinks (including symlinks to directories) come
+	// back from ReadDir with IsDir()==false, since SFTP reports directory
+	// entries the way lstat would, without following links. They're handled
+	// as leaves via walkFn below rather than recursed into, which also means
+	// cyclic symlinks can't cause unbounded recursion here.
 	for _, entry := range entries {
 		childPath := path.Join(dirPath, entry.Name())
 		if entry.IsDir() {
@@ -696,12 +815,27 @@ func (c *SSHClient) walk(dirPath string, walkFn walkFunc, info os.FileInfo) erro
 // filepathSkipDir is used as a return value from Walk to skip a directory.
 var filepathSkipDir = fmt.Errorf("skip this directory")
 
+// isSymlinkToDir reports whether the walk entry at remotePath is a symlink
+// whose target is a directory. Such entries can't be copied with a plain
+// Open()/Create() file copy (the server rejects opening a directory for
+// reading), so callers use this to skip them instead of failing outright.
+func isSymlinkToDir(c *SSHClient, remotePath string, info os.FileInfo) bool {
+	if info.Mode()&os.ModeSymlink == 0 {
+		return false
+	}
+	target, err := c.Stat(remotePath)
+	return err == nil && target.IsDir()
+}
+
 // DirectorySize recursively walks a remote directory and sums up file sizes.
+// Unreadable subdirectories are skipped gracefully instead of aborting the entire walk.
 func (c *SSHClient) DirectorySize(dirPath string) (int64, error) {
 	var total int64
 	err := c.Walk(dirPath, func(_ string, info os.FileInfo, err error) error {
 		if err != nil {
-			return err
+			// Skip unreadable directories instead of aborting the walk.
+			// This handles permission-denied and other transient SFTP errors.
+			return filepathSkipDir
 		}
 		if !info.IsDir() {
 			total += info.Size()

internal/fs/remote/config.go

@@ -6,13 +6,15 @@ import (
 	"os"
 	"path/filepath"
 	"strings"
+
+	"vcom/internal/homedir"
 )
 
 // ParseSSHConfig parses ~/.ssh/config and returns a list of SSH hosts.
 // It handles the most common SSH config directives: Host, HostName, Port, User, IdentityFile.
 func ParseSSHConfig() []SSHHost {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
 		return nil
 	}
 
@@ -129,8 +131,8 @@ func resolveIdentityPath(path string) string {
 
 	// Handle ~/ or $HOME/
 	if strings.HasPrefix(path, "~/") {
-		home, err := os.UserHomeDir()
+		home := homedir.Dir()
-		if err != nil {
+		if home == "" {
 			return path
 		}
 		path = filepath.Join(home, path[2:])
@@ -138,8 +140,8 @@ func resolveIdentityPath(path string) string {
 
 	// Handle relative paths (relative to ~/.ssh/)
 	if !filepath.IsAbs(path) {
-		home, err := os.UserHomeDir()
+		home := homedir.Dir()
-		if err != nil {
+		if home == "" {
 			return path
 		}
 		path = filepath.Join(home, ".ssh", path)
@@ -150,8 +152,8 @@ func resolveIdentityPath(path string) string {
 
 // SSHConfigPath returns the path to the user's SSH config file.
 func SSHConfigPath() string {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
 		return ""
 	}
 	return filepath.Join(home, ".ssh", "config")
@@ -159,8 +161,8 @@ func SSHConfigPath() string {
 
 // HostsFilePath returns the path to the custom hosts data file.
 func HostsFilePath() string {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
 		return ""
 	}
 	return filepath.Join(home, ".config", "vcom", "hosts.dat")
@@ -168,8 +170,8 @@ func HostsFilePath() string {
 
 // GetSSHDir returns the path to the .ssh directory.
 func GetSSHDir() string {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
 		return ""
 	}
 	return filepath.Join(home, ".ssh")
@@ -177,8 +179,8 @@ func GetSSHDir() string {
 
 // KnownHostsPath returns the path to known_hosts.
 func KnownHostsPath() string {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
 		return ""
 	}
 	return filepath.Join(home, ".ssh", "known_hosts")

internal/fs/remote/host.go

@@ -11,6 +11,8 @@ import (
 	"os"
 	"path/filepath"
 	"strings"
+
+	"vcom/internal/homedir"
 )
 
 // SSHHost represents a single SSH host configuration.
@@ -66,9 +68,9 @@ type HostStore struct {
 
 // NewHostStore creates a new HostStore.
 func NewHostStore() (*HostStore, error) {
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
-		return nil, fmt.Errorf("home dir: %w", err)
+		return nil, fmt.Errorf("cannot determine home directory")
 	}
 
 	store := &HostStore{
@@ -77,6 +79,7 @@ func NewHostStore() (*HostStore, error) {
 
 	// Load or create encryption key
 	keyPath := filepath.Join(home, ".config", "vcom", ".hosts-key")
+	var err error
 	store.cipherKey, err = loadOrCreateKey(keyPath)
 	if err != nil {
 		return nil, fmt.Errorf("encryption key: %w", err)

internal/homedir/homedir.go

@@ -0,0 +1,26 @@
+// Package homedir resolves the real user's home directory, including when
+// the process is running under sudo.
+package homedir
+
+import (
+	"os"
+	"os/user"
+)
+
+// Dir returns the real user's home directory. os.UserHomeDir() resolves to
+// /root when the process is running as root via sudo, which points config,
+// SSH, and trash paths at the wrong place. When the effective UID is 0 and
+// SUDO_USER is set, it resolves the invoking user's home instead.
+func Dir() string {
+	if os.Geteuid() == 0 {
+		if sudoUser := os.Getenv("SUDO_USER"); sudoUser != "" {
+			if u, err := user.Lookup(sudoUser); err == nil {
+				return u.HomeDir
+			}
+		}
+	}
+	if h, err := os.UserHomeDir(); err == nil {
+		return h
+	}
+	return ""
+}

internal/ui/model.go

@@ -24,6 +24,7 @@ import (
 	"vcom/internal/config"
 	vfs "vcom/internal/fs"
 	"vcom/internal/fs/remote"
+	"vcom/internal/homedir"
 	"vcom/internal/theme"
 )
 
@@ -272,9 +273,9 @@ func NewModel(cfg config.Config, configPath string) (Model, error) {
 		return Model{}, err
 	}
 
-	home, err := os.UserHomeDir()
+	home := homedir.Dir()
-	if err != nil {
+	if home == "" {
-		return Model{}, fmt.Errorf("resolve home dir: %w", err)
+		return Model{}, fmt.Errorf("cannot determine home directory")
 	}
 
 	leftPath, err := resolveStartPath(cfg.Startup.LeftPath, home)
@@ -5671,9 +5672,9 @@ func resolveStartPath(raw string, fallback string) (string, error) {
 		return fallback, nil
 	}
 	if strings.HasPrefix(value, "~/") {
-		home, err := os.UserHomeDir()
+		home := homedir.Dir()
-		if err != nil {
+		if home == "" {
-			return "", err
+			return "", fmt.Errorf("cannot determine home directory")
 		}
 		value = filepath.Join(home, strings.TrimPrefix(value, "~/"))
 	}
@@ -6466,6 +6467,11 @@ func (m *Model) startRemoteCopyJob(kind fileOpKind, sources []string, targetDir
 								}, ctx)
 							} else {
 								log.Printf("[JOB] remoteCopy — local→remote file: job=%d source=%s target=%s size=%d", jobID, sourcePath, targetPath, info.Size())
+								// Check context before single-file transfer
+								if ctx.Err() != nil {
+									m.copyProgress <- copyDoneMsg{jobID: jobID, kind: kind, sourcePaths: sources, targetDir: targetDir, err: ctx.Err()}
+									return
+								}
 								err = dstClient.CopyFileToRemote(sourcePath, targetPath)
 							}
 						}
@@ -6491,6 +6497,11 @@ func (m *Model) startRemoteCopyJob(kind fileOpKind, sources []string, targetDir
 								}, ctx)
 							} else {
 								log.Printf("[JOB] remoteCopy — remote→local file: job=%d source=%s target=%s size=%d", jobID, sourcePath, targetPath, info.Size())
+								// Check context before single-file transfer so cancel works between files
+								if ctx.Err() != nil {
+									m.copyProgress <- copyDoneMsg{jobID: jobID, kind: kind, sourcePaths: sources, targetDir: targetDir, err: ctx.Err()}
+									return
+								}
 								err = srcClient.CopyFileFromRemote(sourcePath, targetPath)
 							}
 						}
@@ -6570,6 +6581,11 @@ func (m *Model) startRemoteCopyJob(kind fileOpKind, sources []string, targetDir
 									}
 								}, ctx)
 							} else {
+								// Check context before remote→remote single-file streaming
+								if ctx.Err() != nil {
+									m.copyProgress <- copyDoneMsg{jobID: jobID, kind: kind, sourcePaths: sources, targetDir: targetDir, err: ctx.Err()}
+									return
+								}
 								err = remote.CopyFileBetweenRemotes(srcClient, dstClient, sourcePath, targetPath)
 							}
 						}

vendor/golang.org/x/crypto/ssh/agent/client.go

@@ -0,0 +1,856 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package agent implements the ssh-agent protocol, and provides both
+// a client and a server. The client can talk to a standard ssh-agent
+// that uses UNIX sockets, and one could implement an alternative
+// ssh-agent process using the sample server.
+//
+// References:
+//
+//	[PROTOCOL.agent]: https://tools.ietf.org/html/draft-miller-ssh-agent-00
+package agent
+
+import (
+	"bytes"
+	"crypto/dsa"
+	"crypto/ecdsa"
+	"crypto/ed25519"
+	"crypto/elliptic"
+	"crypto/rsa"
+	"encoding/base64"
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+	"math/big"
+	"sync"
+
+	"golang.org/x/crypto/ssh"
+)
+
+// SignatureFlags represent additional flags that can be passed to the signature
+// requests an defined in [PROTOCOL.agent] section 4.5.1.
+type SignatureFlags uint32
+
+// SignatureFlag values as defined in [PROTOCOL.agent] section 5.3.
+const (
+	SignatureFlagReserved SignatureFlags = 1 << iota
+	SignatureFlagRsaSha256
+	SignatureFlagRsaSha512
+)
+
+// Agent represents the capabilities of an ssh-agent.
+type Agent interface {
+	// List returns the identities known to the agent.
+	List() ([]*Key, error)
+
+	// Sign has the agent sign the data using a protocol 2 key as defined
+	// in [PROTOCOL.agent] section 2.6.2.
+	Sign(key ssh.PublicKey, data []byte) (*ssh.Signature, error)
+
+	// Add adds a private key to the agent.
+	Add(key AddedKey) error
+
+	// Remove removes all identities with the given public key.
+	Remove(key ssh.PublicKey) error
+
+	// RemoveAll removes all identities.
+	RemoveAll() error
+
+	// Lock locks the agent. Sign and Remove will fail, and List will empty an empty list.
+	Lock(passphrase []byte) error
+
+	// Unlock undoes the effect of Lock
+	Unlock(passphrase []byte) error
+
+	// Signers returns signers for all the known keys.
+	Signers() ([]ssh.Signer, error)
+}
+
+type ExtendedAgent interface {
+	Agent
+
+	// SignWithFlags signs like Sign, but allows for additional flags to be sent/received
+	SignWithFlags(key ssh.PublicKey, data []byte, flags SignatureFlags) (*ssh.Signature, error)
+
+	// Extension processes a custom extension request. Standard-compliant agents are not
+	// required to support any extensions, but this method allows agents to implement
+	// vendor-specific methods or add experimental features. See [PROTOCOL.agent] section 4.7.
+	// If agent extensions are unsupported entirely this method MUST return an
+	// ErrExtensionUnsupported error. Similarly, if just the specific extensionType in
+	// the request is unsupported by the agent then ErrExtensionUnsupported MUST be
+	// returned.
+	//
+	// In the case of success, since [PROTOCOL.agent] section 4.7 specifies that the contents
+	// of the response are unspecified (including the type of the message), the complete
+	// response will be returned as a []byte slice, including the "type" byte of the message.
+	Extension(extensionType string, contents []byte) ([]byte, error)
+}
+
+// ConstraintExtension describes an optional constraint defined by users.
+type ConstraintExtension struct {
+	// ExtensionName consist of a UTF-8 string suffixed by the
+	// implementation domain following the naming scheme defined
+	// in Section 4.2 of RFC 4251, e.g.  "foo@example.com".
+	ExtensionName string
+	// ExtensionDetails contains the actual content of the extended
+	// constraint.
+	ExtensionDetails []byte
+}
+
+// AddedKey describes an SSH key to be added to an Agent.
+type AddedKey struct {
+	// PrivateKey must be a *rsa.PrivateKey, *dsa.PrivateKey,
+	// ed25519.PrivateKey or *ecdsa.PrivateKey, which will be inserted into the
+	// agent.
+	PrivateKey interface{}
+	// Certificate, if not nil, is communicated to the agent and will be
+	// stored with the key.
+	Certificate *ssh.Certificate
+	// Comment is an optional, free-form string.
+	Comment string
+	// LifetimeSecs, if not zero, is the number of seconds that the
+	// agent will store the key for.
+	LifetimeSecs uint32
+	// ConfirmBeforeUse, if true, requests that the agent confirm with the
+	// user before each use of this key.
+	ConfirmBeforeUse bool
+	// ConstraintExtensions are the experimental or private-use constraints
+	// defined by users.
+	ConstraintExtensions []ConstraintExtension
+}
+
+// See [PROTOCOL.agent], section 3.
+const (
+	agentRequestV1Identities   = 1
+	agentRemoveAllV1Identities = 9
+
+	// 3.2 Requests from client to agent for protocol 2 key operations
+	agentAddIdentity         = 17
+	agentRemoveIdentity      = 18
+	agentRemoveAllIdentities = 19
+	agentAddIDConstrained    = 25
+
+	// 3.3 Key-type independent requests from client to agent
+	agentAddSmartcardKey            = 20
+	agentRemoveSmartcardKey         = 21
+	agentLock                       = 22
+	agentUnlock                     = 23
+	agentAddSmartcardKeyConstrained = 26
+
+	// 3.7 Key constraint identifiers
+	agentConstrainLifetime = 1
+	agentConstrainConfirm  = 2
+	// Constraint extension identifier up to version 2 of the protocol. A
+	// backward incompatible change will be required if we want to add support
+	// for SSH_AGENT_CONSTRAIN_MAXSIGN which uses the same ID.
+	agentConstrainExtensionV00 = 3
+	// Constraint extension identifier in version 3 and later of the protocol.
+	agentConstrainExtension = 255
+)
+
+// maxAgentResponseBytes is the maximum agent reply size that is accepted. This
+// is a sanity check, not a limit in the spec.
+const maxAgentResponseBytes = 16 << 20
+
+// Agent messages:
+// These structures mirror the wire format of the corresponding ssh agent
+// messages found in [PROTOCOL.agent].
+
+// 3.4 Generic replies from agent to client
+const agentFailure = 5
+
+type failureAgentMsg struct{}
+
+const agentSuccess = 6
+
+type successAgentMsg struct{}
+
+// See [PROTOCOL.agent], section 2.5.2.
+const agentRequestIdentities = 11
+
+type requestIdentitiesAgentMsg struct{}
+
+// See [PROTOCOL.agent], section 2.5.2.
+const agentIdentitiesAnswer = 12
+
+type identitiesAnswerAgentMsg struct {
+	NumKeys uint32 `sshtype:"12"`
+	Keys    []byte `ssh:"rest"`
+}
+
+// See [PROTOCOL.agent], section 2.6.2.
+const agentSignRequest = 13
+
+type signRequestAgentMsg struct {
+	KeyBlob []byte `sshtype:"13"`
+	Data    []byte
+	Flags   uint32
+}
+
+// See [PROTOCOL.agent], section 2.6.2.
+
+// 3.6 Replies from agent to client for protocol 2 key operations
+const agentSignResponse = 14
+
+type signResponseAgentMsg struct {
+	SigBlob []byte `sshtype:"14"`
+}
+
+type publicKey struct {
+	Format string
+	Rest   []byte `ssh:"rest"`
+}
+
+// 3.7 Key constraint identifiers
+type constrainLifetimeAgentMsg struct {
+	LifetimeSecs uint32 `sshtype:"1"`
+}
+
+type constrainExtensionAgentMsg struct {
+	ExtensionName    string `sshtype:"255|3"`
+	ExtensionDetails []byte
+
+	// Rest is a field used for parsing, not part of message
+	Rest []byte `ssh:"rest"`
+}
+
+// See [PROTOCOL.agent], section 4.7
+const agentExtension = 27
+const agentExtensionFailure = 28
+
+// ErrExtensionUnsupported indicates that an extension defined in
+// [PROTOCOL.agent] section 4.7 is unsupported by the agent. Specifically this
+// error indicates that the agent returned a standard SSH_AGENT_FAILURE message
+// as the result of a SSH_AGENTC_EXTENSION request. Note that the protocol
+// specification (and therefore this error) does not distinguish between a
+// specific extension being unsupported and extensions being unsupported entirely.
+var ErrExtensionUnsupported = errors.New("agent: extension unsupported")
+
+type extensionAgentMsg struct {
+	ExtensionType string `sshtype:"27"`
+	// NOTE: this matches OpenSSH's PROTOCOL.agent, not the IETF draft [PROTOCOL.agent],
+	// so that it matches what OpenSSH actually implements in the wild.
+	Contents []byte `ssh:"rest"`
+}
+
+// Key represents a protocol 2 public key as defined in
+// [PROTOCOL.agent], section 2.5.2.
+type Key struct {
+	Format  string
+	Blob    []byte
+	Comment string
+}
+
+func clientErr(err error) error {
+	return fmt.Errorf("agent: client error: %v", err)
+}
+
+// String returns the storage form of an agent key with the format, base64
+// encoded serialized key, and the comment if it is not empty.
+func (k *Key) String() string {
+	s := string(k.Format) + " " + base64.StdEncoding.EncodeToString(k.Blob)
+
+	if k.Comment != "" {
+		s += " " + k.Comment
+	}
+
+	return s
+}
+
+// Type returns the public key type.
+func (k *Key) Type() string {
+	return k.Format
+}
+
+// Marshal returns key blob to satisfy the ssh.PublicKey interface.
+func (k *Key) Marshal() []byte {
+	return k.Blob
+}
+
+// Verify satisfies the ssh.PublicKey interface.
+func (k *Key) Verify(data []byte, sig *ssh.Signature) error {
+	pubKey, err := ssh.ParsePublicKey(k.Blob)
+	if err != nil {
+		return fmt.Errorf("agent: bad public key: %v", err)
+	}
+	return pubKey.Verify(data, sig)
+}
+
+type wireKey struct {
+	Format string
+	Rest   []byte `ssh:"rest"`
+}
+
+func parseKey(in []byte) (out *Key, rest []byte, err error) {
+	var record struct {
+		Blob    []byte
+		Comment string
+		Rest    []byte `ssh:"rest"`
+	}
+
+	if err := ssh.Unmarshal(in, &record); err != nil {
+		return nil, nil, err
+	}
+
+	var wk wireKey
+	if err := ssh.Unmarshal(record.Blob, &wk); err != nil {
+		return nil, nil, err
+	}
+
+	return &Key{
+		Format:  wk.Format,
+		Blob:    record.Blob,
+		Comment: record.Comment,
+	}, record.Rest, nil
+}
+
+// client is a client for an ssh-agent process.
+type client struct {
+	// conn is typically a *net.UnixConn
+	conn io.ReadWriter
+	// mu is used to prevent concurrent access to the agent
+	mu sync.Mutex
+}
+
+// NewClient returns an Agent that talks to an ssh-agent process over
+// the given connection.
+func NewClient(rw io.ReadWriter) ExtendedAgent {
+	return &client{conn: rw}
+}
+
+// call sends an RPC to the agent. On success, the reply is
+// unmarshaled into reply and replyType is set to the first byte of
+// the reply, which contains the type of the message.
+func (c *client) call(req []byte) (reply interface{}, err error) {
+	buf, err := c.callRaw(req)
+	if err != nil {
+		return nil, err
+	}
+	reply, err = unmarshal(buf)
+	if err != nil {
+		return nil, clientErr(err)
+	}
+	return reply, nil
+}
+
+// callRaw sends an RPC to the agent. On success, the raw
+// bytes of the response are returned; no unmarshalling is
+// performed on the response.
+func (c *client) callRaw(req []byte) (reply []byte, err error) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+
+	msg := make([]byte, 4+len(req))
+	binary.BigEndian.PutUint32(msg, uint32(len(req)))
+	copy(msg[4:], req)
+	if _, err = c.conn.Write(msg); err != nil {
+		return nil, clientErr(err)
+	}
+
+	var respSizeBuf [4]byte
+	if _, err = io.ReadFull(c.conn, respSizeBuf[:]); err != nil {
+		return nil, clientErr(err)
+	}
+	respSize := binary.BigEndian.Uint32(respSizeBuf[:])
+	if respSize > maxAgentResponseBytes {
+		return nil, clientErr(errors.New("response too large"))
+	}
+
+	buf := make([]byte, respSize)
+	if _, err = io.ReadFull(c.conn, buf); err != nil {
+		return nil, clientErr(err)
+	}
+	return buf, nil
+}
+
+func (c *client) simpleCall(req []byte) error {
+	resp, err := c.call(req)
+	if err != nil {
+		return err
+	}
+	if _, ok := resp.(*successAgentMsg); ok {
+		return nil
+	}
+	return errors.New("agent: failure")
+}
+
+func (c *client) RemoveAll() error {
+	return c.simpleCall([]byte{agentRemoveAllIdentities})
+}
+
+func (c *client) Remove(key ssh.PublicKey) error {
+	req := ssh.Marshal(&agentRemoveIdentityMsg{
+		KeyBlob: key.Marshal(),
+	})
+	return c.simpleCall(req)
+}
+
+func (c *client) Lock(passphrase []byte) error {
+	req := ssh.Marshal(&agentLockMsg{
+		Passphrase: passphrase,
+	})
+	return c.simpleCall(req)
+}
+
+func (c *client) Unlock(passphrase []byte) error {
+	req := ssh.Marshal(&agentUnlockMsg{
+		Passphrase: passphrase,
+	})
+	return c.simpleCall(req)
+}
+
+// List returns the identities known to the agent.
+func (c *client) List() ([]*Key, error) {
+	// see [PROTOCOL.agent] section 2.5.2.
+	req := []byte{agentRequestIdentities}
+
+	msg, err := c.call(req)
+	if err != nil {
+		return nil, err
+	}
+
+	switch msg := msg.(type) {
+	case *identitiesAnswerAgentMsg:
+		if msg.NumKeys > maxAgentResponseBytes/8 {
+			return nil, errors.New("agent: too many keys in agent reply")
+		}
+		keys := make([]*Key, msg.NumKeys)
+		data := msg.Keys
+		for i := uint32(0); i < msg.NumKeys; i++ {
+			var key *Key
+			var err error
+			if key, data, err = parseKey(data); err != nil {
+				return nil, err
+			}
+			keys[i] = key
+		}
+		return keys, nil
+	case *failureAgentMsg:
+		return nil, errors.New("agent: failed to list keys")
+	default:
+		return nil, fmt.Errorf("agent: failed to list keys, unexpected message type %T", msg)
+	}
+}
+
+// Sign has the agent sign the data using a protocol 2 key as defined
+// in [PROTOCOL.agent] section 2.6.2.
+func (c *client) Sign(key ssh.PublicKey, data []byte) (*ssh.Signature, error) {
+	return c.SignWithFlags(key, data, 0)
+}
+
+func (c *client) SignWithFlags(key ssh.PublicKey, data []byte, flags SignatureFlags) (*ssh.Signature, error) {
+	req := ssh.Marshal(signRequestAgentMsg{
+		KeyBlob: key.Marshal(),
+		Data:    data,
+		Flags:   uint32(flags),
+	})
+
+	msg, err := c.call(req)
+	if err != nil {
+		return nil, err
+	}
+
+	switch msg := msg.(type) {
+	case *signResponseAgentMsg:
+		var sig ssh.Signature
+		if err := ssh.Unmarshal(msg.SigBlob, &sig); err != nil {
+			return nil, err
+		}
+
+		return &sig, nil
+	case *failureAgentMsg:
+		return nil, errors.New("agent: failed to sign challenge")
+	default:
+		return nil, fmt.Errorf("agent: failed to sign challenge, unexpected message type %T", msg)
+	}
+}
+
+// unmarshal parses an agent message in packet, returning the parsed
+// form and the message type of packet.
+func unmarshal(packet []byte) (interface{}, error) {
+	if len(packet) < 1 {
+		return nil, errors.New("agent: empty packet")
+	}
+	var msg interface{}
+	switch packet[0] {
+	case agentFailure:
+		return new(failureAgentMsg), nil
+	case agentSuccess:
+		return new(successAgentMsg), nil
+	case agentIdentitiesAnswer:
+		msg = new(identitiesAnswerAgentMsg)
+	case agentSignResponse:
+		msg = new(signResponseAgentMsg)
+	case agentV1IdentitiesAnswer:
+		msg = new(agentV1IdentityMsg)
+	default:
+		return nil, fmt.Errorf("agent: unknown type tag %d", packet[0])
+	}
+	if err := ssh.Unmarshal(packet, msg); err != nil {
+		return nil, err
+	}
+	return msg, nil
+}
+
+type rsaKeyMsg struct {
+	Type        string `sshtype:"17|25"`
+	N           *big.Int
+	E           *big.Int
+	D           *big.Int
+	Iqmp        *big.Int // IQMP = Inverse Q Mod P
+	P           *big.Int
+	Q           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type dsaKeyMsg struct {
+	Type        string `sshtype:"17|25"`
+	P           *big.Int
+	Q           *big.Int
+	G           *big.Int
+	Y           *big.Int
+	X           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type ecdsaKeyMsg struct {
+	Type        string `sshtype:"17|25"`
+	Curve       string
+	KeyBytes    []byte
+	D           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type ed25519KeyMsg struct {
+	Type        string `sshtype:"17|25"`
+	Pub         []byte
+	Priv        []byte
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+// Insert adds a private key to the agent.
+func (c *client) insertKey(s interface{}, comment string, constraints []byte) error {
+	var req []byte
+	switch k := s.(type) {
+	case *rsa.PrivateKey:
+		if len(k.Primes) != 2 {
+			return fmt.Errorf("agent: unsupported RSA key with %d primes", len(k.Primes))
+		}
+		k.Precompute()
+		req = ssh.Marshal(rsaKeyMsg{
+			Type:        ssh.KeyAlgoRSA,
+			N:           k.N,
+			E:           big.NewInt(int64(k.E)),
+			D:           k.D,
+			Iqmp:        k.Precomputed.Qinv,
+			P:           k.Primes[0],
+			Q:           k.Primes[1],
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case *dsa.PrivateKey:
+		req = ssh.Marshal(dsaKeyMsg{
+			Type:        ssh.InsecureKeyAlgoDSA,
+			P:           k.P,
+			Q:           k.Q,
+			G:           k.G,
+			Y:           k.Y,
+			X:           k.X,
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case *ecdsa.PrivateKey:
+		nistID := fmt.Sprintf("nistp%d", k.Params().BitSize)
+		req = ssh.Marshal(ecdsaKeyMsg{
+			Type:        "ecdsa-sha2-" + nistID,
+			Curve:       nistID,
+			KeyBytes:    elliptic.Marshal(k.Curve, k.X, k.Y),
+			D:           k.D,
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case ed25519.PrivateKey:
+		req = ssh.Marshal(ed25519KeyMsg{
+			Type:        ssh.KeyAlgoED25519,
+			Pub:         []byte(k)[32:],
+			Priv:        []byte(k),
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	// This function originally supported only *ed25519.PrivateKey, however the
+	// general idiom is to pass ed25519.PrivateKey by value, not by pointer.
+	// We still support the pointer variant for backwards compatibility.
+	case *ed25519.PrivateKey:
+		req = ssh.Marshal(ed25519KeyMsg{
+			Type:        ssh.KeyAlgoED25519,
+			Pub:         []byte(*k)[32:],
+			Priv:        []byte(*k),
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	default:
+		return fmt.Errorf("agent: unsupported key type %T", s)
+	}
+
+	// if constraints are present then the message type needs to be changed.
+	if len(constraints) != 0 {
+		req[0] = agentAddIDConstrained
+	}
+
+	resp, err := c.call(req)
+	if err != nil {
+		return err
+	}
+	if _, ok := resp.(*successAgentMsg); ok {
+		return nil
+	}
+	return errors.New("agent: failure")
+}
+
+type rsaCertMsg struct {
+	Type        string `sshtype:"17|25"`
+	CertBytes   []byte
+	D           *big.Int
+	Iqmp        *big.Int // IQMP = Inverse Q Mod P
+	P           *big.Int
+	Q           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type dsaCertMsg struct {
+	Type        string `sshtype:"17|25"`
+	CertBytes   []byte
+	X           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type ecdsaCertMsg struct {
+	Type        string `sshtype:"17|25"`
+	CertBytes   []byte
+	D           *big.Int
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+type ed25519CertMsg struct {
+	Type        string `sshtype:"17|25"`
+	CertBytes   []byte
+	Pub         []byte
+	Priv        []byte
+	Comments    string
+	Constraints []byte `ssh:"rest"`
+}
+
+// Add adds a private key to the agent. If a certificate is given,
+// that certificate is added instead as public key.
+func (c *client) Add(key AddedKey) error {
+	var constraints []byte
+
+	if secs := key.LifetimeSecs; secs != 0 {
+		constraints = append(constraints, ssh.Marshal(constrainLifetimeAgentMsg{secs})...)
+	}
+
+	if key.ConfirmBeforeUse {
+		constraints = append(constraints, agentConstrainConfirm)
+	}
+
+	cert := key.Certificate
+	if cert == nil {
+		return c.insertKey(key.PrivateKey, key.Comment, constraints)
+	}
+	return c.insertCert(key.PrivateKey, cert, key.Comment, constraints)
+}
+
+func (c *client) insertCert(s interface{}, cert *ssh.Certificate, comment string, constraints []byte) error {
+	var req []byte
+	switch k := s.(type) {
+	case *rsa.PrivateKey:
+		if len(k.Primes) != 2 {
+			return fmt.Errorf("agent: unsupported RSA key with %d primes", len(k.Primes))
+		}
+		k.Precompute()
+		req = ssh.Marshal(rsaCertMsg{
+			Type:        cert.Type(),
+			CertBytes:   cert.Marshal(),
+			D:           k.D,
+			Iqmp:        k.Precomputed.Qinv,
+			P:           k.Primes[0],
+			Q:           k.Primes[1],
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case *dsa.PrivateKey:
+		req = ssh.Marshal(dsaCertMsg{
+			Type:        cert.Type(),
+			CertBytes:   cert.Marshal(),
+			X:           k.X,
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case *ecdsa.PrivateKey:
+		req = ssh.Marshal(ecdsaCertMsg{
+			Type:        cert.Type(),
+			CertBytes:   cert.Marshal(),
+			D:           k.D,
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	case ed25519.PrivateKey:
+		req = ssh.Marshal(ed25519CertMsg{
+			Type:        cert.Type(),
+			CertBytes:   cert.Marshal(),
+			Pub:         []byte(k)[32:],
+			Priv:        []byte(k),
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	// This function originally supported only *ed25519.PrivateKey, however the
+	// general idiom is to pass ed25519.PrivateKey by value, not by pointer.
+	// We still support the pointer variant for backwards compatibility.
+	case *ed25519.PrivateKey:
+		req = ssh.Marshal(ed25519CertMsg{
+			Type:        cert.Type(),
+			CertBytes:   cert.Marshal(),
+			Pub:         []byte(*k)[32:],
+			Priv:        []byte(*k),
+			Comments:    comment,
+			Constraints: constraints,
+		})
+	default:
+		return fmt.Errorf("agent: unsupported key type %T", s)
+	}
+
+	// if constraints are present then the message type needs to be changed.
+	if len(constraints) != 0 {
+		req[0] = agentAddIDConstrained
+	}
+
+	signer, err := ssh.NewSignerFromKey(s)
+	if err != nil {
+		return err
+	}
+	if !bytes.Equal(cert.Key.Marshal(), signer.PublicKey().Marshal()) {
+		return errors.New("agent: signer and cert have different public key")
+	}
+
+	resp, err := c.call(req)
+	if err != nil {
+		return err
+	}
+	if _, ok := resp.(*successAgentMsg); ok {
+		return nil
+	}
+	return errors.New("agent: failure")
+}
+
+// Signers provides a callback for client authentication.
+func (c *client) Signers() ([]ssh.Signer, error) {
+	keys, err := c.List()
+	if err != nil {
+		return nil, err
+	}
+
+	var result []ssh.Signer
+	for _, k := range keys {
+		result = append(result, &agentKeyringSigner{c, k})
+	}
+	return result, nil
+}
+
+type agentKeyringSigner struct {
+	agent *client
+	pub   ssh.PublicKey
+}
+
+func (s *agentKeyringSigner) PublicKey() ssh.PublicKey {
+	return s.pub
+}
+
+func (s *agentKeyringSigner) Sign(rand io.Reader, data []byte) (*ssh.Signature, error) {
+	// The agent has its own entropy source, so the rand argument is ignored.
+	return s.agent.Sign(s.pub, data)
+}
+
+func (s *agentKeyringSigner) SignWithAlgorithm(rand io.Reader, data []byte, algorithm string) (*ssh.Signature, error) {
+	if algorithm == "" || algorithm == underlyingAlgo(s.pub.Type()) {
+		return s.Sign(rand, data)
+	}
+
+	var flags SignatureFlags
+	switch algorithm {
+	case ssh.KeyAlgoRSASHA256:
+		flags = SignatureFlagRsaSha256
+	case ssh.KeyAlgoRSASHA512:
+		flags = SignatureFlagRsaSha512
+	default:
+		return nil, fmt.Errorf("agent: unsupported algorithm %q", algorithm)
+	}
+
+	return s.agent.SignWithFlags(s.pub, data, flags)
+}
+
+var _ ssh.AlgorithmSigner = &agentKeyringSigner{}
+
+// certKeyAlgoNames is a mapping from known certificate algorithm names to the
+// corresponding public key signature algorithm.
+//
+// This map must be kept in sync with the one in certs.go.
+var certKeyAlgoNames = map[string]string{
+	ssh.CertAlgoRSAv01:         ssh.KeyAlgoRSA,
+	ssh.CertAlgoRSASHA256v01:   ssh.KeyAlgoRSASHA256,
+	ssh.CertAlgoRSASHA512v01:   ssh.KeyAlgoRSASHA512,
+	ssh.InsecureCertAlgoDSAv01: ssh.InsecureKeyAlgoDSA,
+	ssh.CertAlgoECDSA256v01:    ssh.KeyAlgoECDSA256,
+	ssh.CertAlgoECDSA384v01:    ssh.KeyAlgoECDSA384,
+	ssh.CertAlgoECDSA521v01:    ssh.KeyAlgoECDSA521,
+	ssh.CertAlgoSKECDSA256v01:  ssh.KeyAlgoSKECDSA256,
+	ssh.CertAlgoED25519v01:     ssh.KeyAlgoED25519,
+	ssh.CertAlgoSKED25519v01:   ssh.KeyAlgoSKED25519,
+}
+
+// underlyingAlgo returns the signature algorithm associated with algo (which is
+// an advertised or negotiated public key or host key algorithm). These are
+// usually the same, except for certificate algorithms.
+func underlyingAlgo(algo string) string {
+	if a, ok := certKeyAlgoNames[algo]; ok {
+		return a
+	}
+	return algo
+}
+
+// Calls an extension method. It is up to the agent implementation as to whether or not
+// any particular extension is supported and may always return an error. Because the
+// type of the response is up to the implementation, this returns the bytes of the
+// response and does not attempt any type of unmarshalling.
+func (c *client) Extension(extensionType string, contents []byte) ([]byte, error) {
+	req := ssh.Marshal(extensionAgentMsg{
+		ExtensionType: extensionType,
+		Contents:      contents,
+	})
+	buf, err := c.callRaw(req)
+	if err != nil {
+		return nil, err
+	}
+	if len(buf) == 0 {
+		return nil, errors.New("agent: failure; empty response")
+	}
+	// [PROTOCOL.agent] section 4.7 indicates that an SSH_AGENT_FAILURE message
+	// represents an agent that does not support the extension
+	if buf[0] == agentFailure {
+		return nil, ErrExtensionUnsupported
+	}
+	if buf[0] == agentExtensionFailure {
+		return nil, errors.New("agent: generic extension failure")
+	}
+
+	return buf, nil
+}

vendor/golang.org/x/crypto/ssh/agent/forward.go

@@ -0,0 +1,103 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package agent
+
+import (
+	"errors"
+	"io"
+	"net"
+	"sync"
+
+	"golang.org/x/crypto/ssh"
+)
+
+// RequestAgentForwarding sets up agent forwarding for the session.
+// ForwardToAgent or ForwardToRemote should be called to route
+// the authentication requests.
+func RequestAgentForwarding(session *ssh.Session) error {
+	ok, err := session.SendRequest("auth-agent-req@openssh.com", true, nil)
+	if err != nil {
+		return err
+	}
+	if !ok {
+		return errors.New("forwarding request denied")
+	}
+	return nil
+}
+
+// ForwardToAgent routes authentication requests to the given keyring.
+func ForwardToAgent(client *ssh.Client, keyring Agent) error {
+	channels := client.HandleChannelOpen(channelType)
+	if channels == nil {
+		return errors.New("agent: already have handler for " + channelType)
+	}
+
+	go func() {
+		for ch := range channels {
+			channel, reqs, err := ch.Accept()
+			if err != nil {
+				continue
+			}
+			go ssh.DiscardRequests(reqs)
+			go func() {
+				ServeAgent(keyring, channel)
+				channel.Close()
+			}()
+		}
+	}()
+	return nil
+}
+
+const channelType = "auth-agent@openssh.com"
+
+// ForwardToRemote routes authentication requests to the ssh-agent
+// process serving on the given unix socket.
+func ForwardToRemote(client *ssh.Client, addr string) error {
+	channels := client.HandleChannelOpen(channelType)
+	if channels == nil {
+		return errors.New("agent: already have handler for " + channelType)
+	}
+	conn, err := net.Dial("unix", addr)
+	if err != nil {
+		return err
+	}
+	conn.Close()
+
+	go func() {
+		for ch := range channels {
+			channel, reqs, err := ch.Accept()
+			if err != nil {
+				continue
+			}
+			go ssh.DiscardRequests(reqs)
+			go forwardUnixSocket(channel, addr)
+		}
+	}()
+	return nil
+}
+
+func forwardUnixSocket(channel ssh.Channel, addr string) {
+	conn, err := net.Dial("unix", addr)
+	if err != nil {
+		return
+	}
+
+	var wg sync.WaitGroup
+	wg.Add(2)
+	go func() {
+		io.Copy(conn, channel)
+		conn.(*net.UnixConn).CloseWrite()
+		wg.Done()
+	}()
+	go func() {
+		io.Copy(channel, conn)
+		channel.CloseWrite()
+		wg.Done()
+	}()
+
+	wg.Wait()
+	conn.Close()
+	channel.Close()
+}

vendor/golang.org/x/crypto/ssh/agent/keyring.go

@@ -0,0 +1,250 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package agent
+
+import (
+	"bytes"
+	"crypto/rand"
+	"crypto/subtle"
+	"errors"
+	"fmt"
+	"sync"
+	"time"
+
+	"golang.org/x/crypto/ssh"
+)
+
+type privKey struct {
+	signer  ssh.Signer
+	comment string
+	expire  *time.Time
+}
+
+type keyring struct {
+	mu   sync.Mutex
+	keys []privKey
+
+	locked     bool
+	passphrase []byte
+}
+
+var errLocked = errors.New("agent: locked")
+
+// NewKeyring returns an Agent that holds keys in memory.  It is safe
+// for concurrent use by multiple goroutines.
+func NewKeyring() Agent {
+	return &keyring{}
+}
+
+// RemoveAll removes all identities.
+func (r *keyring) RemoveAll() error {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return errLocked
+	}
+
+	r.keys = nil
+	return nil
+}
+
+// removeLocked does the actual key removal. The caller must already be holding the
+// keyring mutex.
+func (r *keyring) removeLocked(want []byte) error {
+	found := false
+	for i := 0; i < len(r.keys); {
+		if bytes.Equal(r.keys[i].signer.PublicKey().Marshal(), want) {
+			found = true
+			r.keys[i] = r.keys[len(r.keys)-1]
+			r.keys = r.keys[:len(r.keys)-1]
+			continue
+		} else {
+			i++
+		}
+	}
+
+	if !found {
+		return errors.New("agent: key not found")
+	}
+	return nil
+}
+
+// Remove removes all identities with the given public key.
+func (r *keyring) Remove(key ssh.PublicKey) error {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return errLocked
+	}
+
+	return r.removeLocked(key.Marshal())
+}
+
+// Lock locks the agent. Sign and Remove will fail, and List will return an empty list.
+func (r *keyring) Lock(passphrase []byte) error {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return errLocked
+	}
+
+	r.locked = true
+	r.passphrase = passphrase
+	return nil
+}
+
+// Unlock undoes the effect of Lock
+func (r *keyring) Unlock(passphrase []byte) error {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if !r.locked {
+		return errors.New("agent: not locked")
+	}
+	if 1 != subtle.ConstantTimeCompare(passphrase, r.passphrase) {
+		return fmt.Errorf("agent: incorrect passphrase")
+	}
+
+	r.locked = false
+	r.passphrase = nil
+	return nil
+}
+
+// expireKeysLocked removes expired keys from the keyring. If a key was added
+// with a lifetimesecs constraint and seconds >= lifetimesecs seconds have
+// elapsed, it is removed. The caller *must* be holding the keyring mutex.
+func (r *keyring) expireKeysLocked() {
+	for _, k := range r.keys {
+		if k.expire != nil && time.Now().After(*k.expire) {
+			r.removeLocked(k.signer.PublicKey().Marshal())
+		}
+	}
+}
+
+// List returns the identities known to the agent.
+func (r *keyring) List() ([]*Key, error) {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		// section 2.7: locked agents return empty.
+		return nil, nil
+	}
+
+	r.expireKeysLocked()
+	var ids []*Key
+	for _, k := range r.keys {
+		pub := k.signer.PublicKey()
+		ids = append(ids, &Key{
+			Format:  pub.Type(),
+			Blob:    pub.Marshal(),
+			Comment: k.comment})
+	}
+	return ids, nil
+}
+
+// Insert adds a private key to the keyring. If a certificate
+// is given, that certificate is added as public key. Note that
+// any constraints given are ignored.
+func (r *keyring) Add(key AddedKey) error {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return errLocked
+	}
+	signer, err := ssh.NewSignerFromKey(key.PrivateKey)
+
+	if err != nil {
+		return err
+	}
+
+	if cert := key.Certificate; cert != nil {
+		signer, err = ssh.NewCertSigner(cert, signer)
+		if err != nil {
+			return err
+		}
+	}
+
+	p := privKey{
+		signer:  signer,
+		comment: key.Comment,
+	}
+
+	if key.LifetimeSecs > 0 {
+		t := time.Now().Add(time.Duration(key.LifetimeSecs) * time.Second)
+		p.expire = &t
+	}
+
+	// If we already have a Signer with the same public key, replace it with the
+	// new one.
+	for idx, k := range r.keys {
+		if bytes.Equal(k.signer.PublicKey().Marshal(), p.signer.PublicKey().Marshal()) {
+			r.keys[idx] = p
+			return nil
+		}
+	}
+
+	r.keys = append(r.keys, p)
+
+	return nil
+}
+
+// Sign returns a signature for the data.
+func (r *keyring) Sign(key ssh.PublicKey, data []byte) (*ssh.Signature, error) {
+	return r.SignWithFlags(key, data, 0)
+}
+
+func (r *keyring) SignWithFlags(key ssh.PublicKey, data []byte, flags SignatureFlags) (*ssh.Signature, error) {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return nil, errLocked
+	}
+
+	r.expireKeysLocked()
+	wanted := key.Marshal()
+	for _, k := range r.keys {
+		if bytes.Equal(k.signer.PublicKey().Marshal(), wanted) {
+			if flags == 0 {
+				return k.signer.Sign(rand.Reader, data)
+			} else {
+				if algorithmSigner, ok := k.signer.(ssh.AlgorithmSigner); !ok {
+					return nil, fmt.Errorf("agent: signature does not support non-default signature algorithm: %T", k.signer)
+				} else {
+					var algorithm string
+					switch flags {
+					case SignatureFlagRsaSha256:
+						algorithm = ssh.KeyAlgoRSASHA256
+					case SignatureFlagRsaSha512:
+						algorithm = ssh.KeyAlgoRSASHA512
+					default:
+						return nil, fmt.Errorf("agent: unsupported signature flags: %d", flags)
+					}
+					return algorithmSigner.SignWithAlgorithm(rand.Reader, data, algorithm)
+				}
+			}
+		}
+	}
+	return nil, errors.New("not found")
+}
+
+// Signers returns signers for all the known keys.
+func (r *keyring) Signers() ([]ssh.Signer, error) {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if r.locked {
+		return nil, errLocked
+	}
+
+	r.expireKeysLocked()
+	s := make([]ssh.Signer, 0, len(r.keys))
+	for _, k := range r.keys {
+		s = append(s, k.signer)
+	}
+	return s, nil
+}
+
+// The keyring does not support any extensions
+func (r *keyring) Extension(extensionType string, contents []byte) ([]byte, error) {
+	return nil, ErrExtensionUnsupported
+}

vendor/golang.org/x/crypto/ssh/agent/server.go

@@ -0,0 +1,573 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package agent
+
+import (
+	"crypto/dsa"
+	"crypto/ecdsa"
+	"crypto/ed25519"
+	"crypto/elliptic"
+	"crypto/rsa"
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+	"log"
+	"math/big"
+
+	"golang.org/x/crypto/ssh"
+)
+
+// server wraps an Agent and uses it to implement the agent side of
+// the SSH-agent, wire protocol.
+type server struct {
+	agent Agent
+}
+
+func (s *server) processRequestBytes(reqData []byte) []byte {
+	rep, err := s.processRequest(reqData)
+	if err != nil {
+		if err != errLocked {
+			// TODO(hanwen): provide better logging interface?
+			log.Printf("agent %d: %v", reqData[0], err)
+		}
+		return []byte{agentFailure}
+	}
+
+	if rep == nil {
+		return []byte{agentSuccess}
+	}
+
+	return ssh.Marshal(rep)
+}
+
+func marshalKey(k *Key) []byte {
+	var record struct {
+		Blob    []byte
+		Comment string
+	}
+	record.Blob = k.Marshal()
+	record.Comment = k.Comment
+
+	return ssh.Marshal(&record)
+}
+
+// See [PROTOCOL.agent], section 2.5.1.
+const agentV1IdentitiesAnswer = 2
+
+type agentV1IdentityMsg struct {
+	Numkeys uint32 `sshtype:"2"`
+}
+
+type agentRemoveIdentityMsg struct {
+	KeyBlob []byte `sshtype:"18"`
+}
+
+type agentLockMsg struct {
+	Passphrase []byte `sshtype:"22"`
+}
+
+type agentUnlockMsg struct {
+	Passphrase []byte `sshtype:"23"`
+}
+
+func (s *server) processRequest(data []byte) (interface{}, error) {
+	switch data[0] {
+	case agentRequestV1Identities:
+		return &agentV1IdentityMsg{0}, nil
+
+	case agentRemoveAllV1Identities:
+		return nil, nil
+
+	case agentRemoveIdentity:
+		var req agentRemoveIdentityMsg
+		if err := ssh.Unmarshal(data, &req); err != nil {
+			return nil, err
+		}
+
+		var wk wireKey
+		if err := ssh.Unmarshal(req.KeyBlob, &wk); err != nil {
+			return nil, err
+		}
+
+		return nil, s.agent.Remove(&Key{Format: wk.Format, Blob: req.KeyBlob})
+
+	case agentRemoveAllIdentities:
+		return nil, s.agent.RemoveAll()
+
+	case agentLock:
+		var req agentLockMsg
+		if err := ssh.Unmarshal(data, &req); err != nil {
+			return nil, err
+		}
+
+		return nil, s.agent.Lock(req.Passphrase)
+
+	case agentUnlock:
+		var req agentUnlockMsg
+		if err := ssh.Unmarshal(data, &req); err != nil {
+			return nil, err
+		}
+		return nil, s.agent.Unlock(req.Passphrase)
+
+	case agentSignRequest:
+		var req signRequestAgentMsg
+		if err := ssh.Unmarshal(data, &req); err != nil {
+			return nil, err
+		}
+
+		var wk wireKey
+		if err := ssh.Unmarshal(req.KeyBlob, &wk); err != nil {
+			return nil, err
+		}
+
+		k := &Key{
+			Format: wk.Format,
+			Blob:   req.KeyBlob,
+		}
+
+		var sig *ssh.Signature
+		var err error
+		if extendedAgent, ok := s.agent.(ExtendedAgent); ok {
+			sig, err = extendedAgent.SignWithFlags(k, req.Data, SignatureFlags(req.Flags))
+		} else {
+			sig, err = s.agent.Sign(k, req.Data)
+		}
+
+		if err != nil {
+			return nil, err
+		}
+		return &signResponseAgentMsg{SigBlob: ssh.Marshal(sig)}, nil
+
+	case agentRequestIdentities:
+		keys, err := s.agent.List()
+		if err != nil {
+			return nil, err
+		}
+
+		rep := identitiesAnswerAgentMsg{
+			NumKeys: uint32(len(keys)),
+		}
+		for _, k := range keys {
+			rep.Keys = append(rep.Keys, marshalKey(k)...)
+		}
+		return rep, nil
+
+	case agentAddIDConstrained, agentAddIdentity:
+		return nil, s.insertIdentity(data)
+
+	case agentExtension:
+		// Return a stub object where the whole contents of the response gets marshaled.
+		var responseStub struct {
+			Rest []byte `ssh:"rest"`
+		}
+
+		if extendedAgent, ok := s.agent.(ExtendedAgent); !ok {
+			// If this agent doesn't implement extensions, [PROTOCOL.agent] section 4.7
+			// requires that we return a standard SSH_AGENT_FAILURE message.
+			responseStub.Rest = []byte{agentFailure}
+		} else {
+			var req extensionAgentMsg
+			if err := ssh.Unmarshal(data, &req); err != nil {
+				return nil, err
+			}
+			res, err := extendedAgent.Extension(req.ExtensionType, req.Contents)
+			if err != nil {
+				// If agent extensions are unsupported, return a standard SSH_AGENT_FAILURE
+				// message as required by [PROTOCOL.agent] section 4.7.
+				if err == ErrExtensionUnsupported {
+					responseStub.Rest = []byte{agentFailure}
+				} else {
+					// As the result of any other error processing an extension request,
+					// [PROTOCOL.agent] section 4.7 requires that we return a
+					// SSH_AGENT_EXTENSION_FAILURE code.
+					responseStub.Rest = []byte{agentExtensionFailure}
+				}
+			} else {
+				if len(res) == 0 {
+					return nil, nil
+				}
+				responseStub.Rest = res
+			}
+		}
+
+		return responseStub, nil
+	}
+
+	return nil, fmt.Errorf("unknown opcode %d", data[0])
+}
+
+func parseConstraints(constraints []byte) (lifetimeSecs uint32, confirmBeforeUse bool, extensions []ConstraintExtension, err error) {
+	for len(constraints) != 0 {
+		switch constraints[0] {
+		case agentConstrainLifetime:
+			if len(constraints) < 5 {
+				return 0, false, nil, io.ErrUnexpectedEOF
+			}
+			lifetimeSecs = binary.BigEndian.Uint32(constraints[1:5])
+			constraints = constraints[5:]
+		case agentConstrainConfirm:
+			confirmBeforeUse = true
+			constraints = constraints[1:]
+		case agentConstrainExtension, agentConstrainExtensionV00:
+			var msg constrainExtensionAgentMsg
+			if err = ssh.Unmarshal(constraints, &msg); err != nil {
+				return 0, false, nil, err
+			}
+			extensions = append(extensions, ConstraintExtension{
+				ExtensionName:    msg.ExtensionName,
+				ExtensionDetails: msg.ExtensionDetails,
+			})
+			constraints = msg.Rest
+		default:
+			return 0, false, nil, fmt.Errorf("unknown constraint type: %d", constraints[0])
+		}
+	}
+	return
+}
+
+func setConstraints(key *AddedKey, constraintBytes []byte) error {
+	lifetimeSecs, confirmBeforeUse, constraintExtensions, err := parseConstraints(constraintBytes)
+	if err != nil {
+		return err
+	}
+
+	key.LifetimeSecs = lifetimeSecs
+	key.ConfirmBeforeUse = confirmBeforeUse
+	key.ConstraintExtensions = constraintExtensions
+	return nil
+}
+
+func parseRSAKey(req []byte) (*AddedKey, error) {
+	var k rsaKeyMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+	if k.E.BitLen() > 30 {
+		return nil, errors.New("agent: RSA public exponent too large")
+	}
+	priv := &rsa.PrivateKey{
+		PublicKey: rsa.PublicKey{
+			E: int(k.E.Int64()),
+			N: k.N,
+		},
+		D:      k.D,
+		Primes: []*big.Int{k.P, k.Q},
+	}
+	priv.Precompute()
+
+	addedKey := &AddedKey{PrivateKey: priv, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseEd25519Key(req []byte) (*AddedKey, error) {
+	var k ed25519KeyMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+	priv := ed25519.PrivateKey(k.Priv)
+
+	addedKey := &AddedKey{PrivateKey: &priv, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseDSAKey(req []byte) (*AddedKey, error) {
+	var k dsaKeyMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+	priv := &dsa.PrivateKey{
+		PublicKey: dsa.PublicKey{
+			Parameters: dsa.Parameters{
+				P: k.P,
+				Q: k.Q,
+				G: k.G,
+			},
+			Y: k.Y,
+		},
+		X: k.X,
+	}
+
+	addedKey := &AddedKey{PrivateKey: priv, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func unmarshalECDSA(curveName string, keyBytes []byte, privScalar *big.Int) (priv *ecdsa.PrivateKey, err error) {
+	priv = &ecdsa.PrivateKey{
+		D: privScalar,
+	}
+
+	switch curveName {
+	case "nistp256":
+		priv.Curve = elliptic.P256()
+	case "nistp384":
+		priv.Curve = elliptic.P384()
+	case "nistp521":
+		priv.Curve = elliptic.P521()
+	default:
+		return nil, fmt.Errorf("agent: unknown curve %q", curveName)
+	}
+
+	priv.X, priv.Y = elliptic.Unmarshal(priv.Curve, keyBytes)
+	if priv.X == nil || priv.Y == nil {
+		return nil, errors.New("agent: point not on curve")
+	}
+
+	return priv, nil
+}
+
+func parseEd25519Cert(req []byte) (*AddedKey, error) {
+	var k ed25519CertMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+	pubKey, err := ssh.ParsePublicKey(k.CertBytes)
+	if err != nil {
+		return nil, err
+	}
+	priv := ed25519.PrivateKey(k.Priv)
+	cert, ok := pubKey.(*ssh.Certificate)
+	if !ok {
+		return nil, errors.New("agent: bad ED25519 certificate")
+	}
+
+	addedKey := &AddedKey{PrivateKey: &priv, Certificate: cert, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseECDSAKey(req []byte) (*AddedKey, error) {
+	var k ecdsaKeyMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+
+	priv, err := unmarshalECDSA(k.Curve, k.KeyBytes, k.D)
+	if err != nil {
+		return nil, err
+	}
+
+	addedKey := &AddedKey{PrivateKey: priv, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseRSACert(req []byte) (*AddedKey, error) {
+	var k rsaCertMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+
+	pubKey, err := ssh.ParsePublicKey(k.CertBytes)
+	if err != nil {
+		return nil, err
+	}
+
+	cert, ok := pubKey.(*ssh.Certificate)
+	if !ok {
+		return nil, errors.New("agent: bad RSA certificate")
+	}
+
+	// An RSA publickey as marshaled by rsaPublicKey.Marshal() in keys.go
+	var rsaPub struct {
+		Name string
+		E    *big.Int
+		N    *big.Int
+	}
+	if err := ssh.Unmarshal(cert.Key.Marshal(), &rsaPub); err != nil {
+		return nil, fmt.Errorf("agent: Unmarshal failed to parse public key: %v", err)
+	}
+
+	if rsaPub.E.BitLen() > 30 {
+		return nil, errors.New("agent: RSA public exponent too large")
+	}
+
+	priv := rsa.PrivateKey{
+		PublicKey: rsa.PublicKey{
+			E: int(rsaPub.E.Int64()),
+			N: rsaPub.N,
+		},
+		D:      k.D,
+		Primes: []*big.Int{k.Q, k.P},
+	}
+	priv.Precompute()
+
+	addedKey := &AddedKey{PrivateKey: &priv, Certificate: cert, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseDSACert(req []byte) (*AddedKey, error) {
+	var k dsaCertMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+	pubKey, err := ssh.ParsePublicKey(k.CertBytes)
+	if err != nil {
+		return nil, err
+	}
+	cert, ok := pubKey.(*ssh.Certificate)
+	if !ok {
+		return nil, errors.New("agent: bad DSA certificate")
+	}
+
+	// A DSA publickey as marshaled by dsaPublicKey.Marshal() in keys.go
+	var w struct {
+		Name       string
+		P, Q, G, Y *big.Int
+	}
+	if err := ssh.Unmarshal(cert.Key.Marshal(), &w); err != nil {
+		return nil, fmt.Errorf("agent: Unmarshal failed to parse public key: %v", err)
+	}
+
+	priv := &dsa.PrivateKey{
+		PublicKey: dsa.PublicKey{
+			Parameters: dsa.Parameters{
+				P: w.P,
+				Q: w.Q,
+				G: w.G,
+			},
+			Y: w.Y,
+		},
+		X: k.X,
+	}
+
+	addedKey := &AddedKey{PrivateKey: priv, Certificate: cert, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func parseECDSACert(req []byte) (*AddedKey, error) {
+	var k ecdsaCertMsg
+	if err := ssh.Unmarshal(req, &k); err != nil {
+		return nil, err
+	}
+
+	pubKey, err := ssh.ParsePublicKey(k.CertBytes)
+	if err != nil {
+		return nil, err
+	}
+	cert, ok := pubKey.(*ssh.Certificate)
+	if !ok {
+		return nil, errors.New("agent: bad ECDSA certificate")
+	}
+
+	// An ECDSA publickey as marshaled by ecdsaPublicKey.Marshal() in keys.go
+	var ecdsaPub struct {
+		Name string
+		ID   string
+		Key  []byte
+	}
+	if err := ssh.Unmarshal(cert.Key.Marshal(), &ecdsaPub); err != nil {
+		return nil, err
+	}
+
+	priv, err := unmarshalECDSA(ecdsaPub.ID, ecdsaPub.Key, k.D)
+	if err != nil {
+		return nil, err
+	}
+
+	addedKey := &AddedKey{PrivateKey: priv, Certificate: cert, Comment: k.Comments}
+	if err := setConstraints(addedKey, k.Constraints); err != nil {
+		return nil, err
+	}
+	return addedKey, nil
+}
+
+func (s *server) insertIdentity(req []byte) error {
+	var record struct {
+		Type string `sshtype:"17|25"`
+		Rest []byte `ssh:"rest"`
+	}
+
+	if err := ssh.Unmarshal(req, &record); err != nil {
+		return err
+	}
+
+	var addedKey *AddedKey
+	var err error
+
+	switch record.Type {
+	case ssh.KeyAlgoRSA:
+		addedKey, err = parseRSAKey(req)
+	case ssh.InsecureKeyAlgoDSA:
+		addedKey, err = parseDSAKey(req)
+	case ssh.KeyAlgoECDSA256, ssh.KeyAlgoECDSA384, ssh.KeyAlgoECDSA521:
+		addedKey, err = parseECDSAKey(req)
+	case ssh.KeyAlgoED25519:
+		addedKey, err = parseEd25519Key(req)
+	case ssh.CertAlgoRSAv01:
+		addedKey, err = parseRSACert(req)
+	case ssh.InsecureCertAlgoDSAv01:
+		addedKey, err = parseDSACert(req)
+	case ssh.CertAlgoECDSA256v01, ssh.CertAlgoECDSA384v01, ssh.CertAlgoECDSA521v01:
+		addedKey, err = parseECDSACert(req)
+	case ssh.CertAlgoED25519v01:
+		addedKey, err = parseEd25519Cert(req)
+	default:
+		return fmt.Errorf("agent: not implemented: %q", record.Type)
+	}
+
+	if err != nil {
+		return err
+	}
+	return s.agent.Add(*addedKey)
+}
+
+// ServeAgent serves the agent protocol on the given connection. It
+// returns when an I/O error occurs.
+func ServeAgent(agent Agent, c io.ReadWriter) error {
+	s := &server{agent}
+
+	var length [4]byte
+	for {
+		if _, err := io.ReadFull(c, length[:]); err != nil {
+			return err
+		}
+		l := binary.BigEndian.Uint32(length[:])
+		if l == 0 {
+			return fmt.Errorf("agent: request size is 0")
+		}
+		if l > maxAgentResponseBytes {
+			// We also cap requests.
+			return fmt.Errorf("agent: request too large: %d", l)
+		}
+
+		req := make([]byte, l)
+		if _, err := io.ReadFull(c, req); err != nil {
+			return err
+		}
+
+		repData := s.processRequestBytes(req)
+		if len(repData) > maxAgentResponseBytes {
+			return fmt.Errorf("agent: reply too large: %d bytes", len(repData))
+		}
+
+		binary.BigEndian.PutUint32(length[:], uint32(len(repData)))
+		if _, err := c.Write(length[:]); err != nil {
+			return err
+		}
+		if _, err := c.Write(repData); err != nil {
+			return err
+		}
+	}
+}

vendor/golang.org/x/crypto/ssh/knownhosts/knownhosts.go

@@ -0,0 +1,532 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package knownhosts implements a parser for the OpenSSH known_hosts
+// host key database, and provides utility functions for writing
+// OpenSSH compliant known_hosts files.
+package knownhosts
+
+import (
+	"bufio"
+	"bytes"
+	"crypto/hmac"
+	"crypto/rand"
+	"crypto/sha1"
+	"encoding/base64"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"os"
+	"strings"
+
+	"golang.org/x/crypto/ssh"
+)
+
+// See the sshd manpage
+// (http://man.openbsd.org/sshd#SSH_KNOWN_HOSTS_FILE_FORMAT) for
+// background.
+
+type addr struct{ host, port string }
+
+func (a *addr) String() string {
+	h := a.host
+	if strings.Contains(h, ":") {
+		h = "[" + h + "]"
+	}
+	return h + ":" + a.port
+}
+
+type matcher interface {
+	match(addr) bool
+}
+
+type hostPattern struct {
+	negate bool
+	addr   addr
+}
+
+func (p *hostPattern) String() string {
+	n := ""
+	if p.negate {
+		n = "!"
+	}
+
+	return n + p.addr.String()
+}
+
+type hostPatterns []hostPattern
+
+func (ps hostPatterns) match(a addr) bool {
+	matched := false
+	for _, p := range ps {
+		if !p.match(a) {
+			continue
+		}
+		if p.negate {
+			return false
+		}
+		matched = true
+	}
+	return matched
+}
+
+// See
+// https://android.googlesource.com/platform/external/openssh/+/ab28f5495c85297e7a597c1ba62e996416da7c7e/addrmatch.c
+// The matching of * has no regard for separators, unlike filesystem globs
+func wildcardMatch(pat []byte, str []byte) bool {
+	for {
+		if len(pat) == 0 {
+			return len(str) == 0
+		}
+		if len(str) == 0 {
+			return false
+		}
+
+		if pat[0] == '*' {
+			if len(pat) == 1 {
+				return true
+			}
+
+			for j := range str {
+				if wildcardMatch(pat[1:], str[j:]) {
+					return true
+				}
+			}
+			return false
+		}
+
+		if pat[0] == '?' || pat[0] == str[0] {
+			pat = pat[1:]
+			str = str[1:]
+		} else {
+			return false
+		}
+	}
+}
+
+func (p *hostPattern) match(a addr) bool {
+	return wildcardMatch([]byte(p.addr.host), []byte(a.host)) && p.addr.port == a.port
+}
+
+type keyDBLine struct {
+	cert     bool
+	matcher  matcher
+	knownKey KnownKey
+}
+
+func serialize(k ssh.PublicKey) string {
+	return k.Type() + " " + base64.StdEncoding.EncodeToString(k.Marshal())
+}
+
+func (l *keyDBLine) match(a addr) bool {
+	return l.matcher.match(a)
+}
+
+type hostKeyDB struct {
+	// Serialized version of revoked keys
+	revoked map[string]*KnownKey
+	lines   []keyDBLine
+}
+
+func newHostKeyDB() *hostKeyDB {
+	db := &hostKeyDB{
+		revoked: make(map[string]*KnownKey),
+	}
+
+	return db
+}
+
+func keyEq(a, b ssh.PublicKey) bool {
+	return bytes.Equal(a.Marshal(), b.Marshal())
+}
+
+// IsHostAuthority can be used as a callback in ssh.CertChecker
+func (db *hostKeyDB) IsHostAuthority(remote ssh.PublicKey, address string) bool {
+	h, p, err := net.SplitHostPort(address)
+	if err != nil {
+		return false
+	}
+	a := addr{host: h, port: p}
+
+	for _, l := range db.lines {
+		if l.cert && keyEq(l.knownKey.Key, remote) && l.match(a) {
+			return true
+		}
+	}
+	return false
+}
+
+// IsRevoked can be used as a callback in ssh.CertChecker
+func (db *hostKeyDB) IsRevoked(key *ssh.Certificate) bool {
+	_, ok := db.revoked[string(key.Marshal())]
+	return ok
+}
+
+const markerCert = "@cert-authority"
+const markerRevoked = "@revoked"
+
+func nextWord(line []byte) (string, []byte) {
+	i := bytes.IndexAny(line, "\t ")
+	if i == -1 {
+		return string(line), nil
+	}
+
+	return string(line[:i]), bytes.TrimSpace(line[i:])
+}
+
+func parseLine(line []byte) (marker, host string, key ssh.PublicKey, err error) {
+	if w, next := nextWord(line); w == markerCert || w == markerRevoked {
+		marker = w
+		line = next
+	}
+
+	host, line = nextWord(line)
+	if len(line) == 0 {
+		return "", "", nil, errors.New("knownhosts: missing host pattern")
+	}
+
+	// ignore the keytype as it's in the key blob anyway.
+	_, line = nextWord(line)
+	if len(line) == 0 {
+		return "", "", nil, errors.New("knownhosts: missing key type pattern")
+	}
+
+	keyBlob, _ := nextWord(line)
+
+	keyBytes, err := base64.StdEncoding.DecodeString(keyBlob)
+	if err != nil {
+		return "", "", nil, err
+	}
+	key, err = ssh.ParsePublicKey(keyBytes)
+	if err != nil {
+		return "", "", nil, err
+	}
+
+	return marker, host, key, nil
+}
+
+func (db *hostKeyDB) parseLine(line []byte, filename string, linenum int) error {
+	marker, pattern, key, err := parseLine(line)
+	if err != nil {
+		return err
+	}
+
+	if marker == markerRevoked {
+		db.revoked[string(key.Marshal())] = &KnownKey{
+			Key:      key,
+			Filename: filename,
+			Line:     linenum,
+		}
+
+		return nil
+	}
+
+	entry := keyDBLine{
+		cert: marker == markerCert,
+		knownKey: KnownKey{
+			Filename: filename,
+			Line:     linenum,
+			Key:      key,
+		},
+	}
+
+	if pattern[0] == '|' {
+		entry.matcher, err = newHashedHost(pattern)
+	} else {
+		entry.matcher, err = newHostnameMatcher(pattern)
+	}
+
+	if err != nil {
+		return err
+	}
+
+	db.lines = append(db.lines, entry)
+	return nil
+}
+
+func newHostnameMatcher(pattern string) (matcher, error) {
+	var hps hostPatterns
+	for _, p := range strings.Split(pattern, ",") {
+		if len(p) == 0 {
+			continue
+		}
+
+		var a addr
+		var negate bool
+		if p[0] == '!' {
+			negate = true
+			p = p[1:]
+		}
+
+		if len(p) == 0 {
+			return nil, errors.New("knownhosts: negation without following hostname")
+		}
+
+		var err error
+		if p[0] == '[' {
+			a.host, a.port, err = net.SplitHostPort(p)
+			if err != nil {
+				return nil, err
+			}
+		} else {
+			a.host, a.port, err = net.SplitHostPort(p)
+			if err != nil {
+				a.host = p
+				a.port = "22"
+			}
+		}
+		hps = append(hps, hostPattern{
+			negate: negate,
+			addr:   a,
+		})
+	}
+	return hps, nil
+}
+
+// KnownKey represents a key declared in a known_hosts file.
+type KnownKey struct {
+	Key      ssh.PublicKey
+	Filename string
+	Line     int
+}
+
+func (k *KnownKey) String() string {
+	return fmt.Sprintf("%s:%d: %s", k.Filename, k.Line, serialize(k.Key))
+}
+
+// KeyError is returned if we did not find the key in the host key
+// database, or there was a mismatch.  Typically, in batch
+// applications, this should be interpreted as failure. Interactive
+// applications can offer an interactive prompt to the user.
+type KeyError struct {
+	// Want holds the accepted host keys. For each key algorithm,
+	// there can be multiple hostkeys.  If Want is empty, the host
+	// is unknown. If Want is non-empty, there was a mismatch, which
+	// can signify a MITM attack.
+	Want []KnownKey
+}
+
+func (u *KeyError) Error() string {
+	if len(u.Want) == 0 {
+		return "knownhosts: key is unknown"
+	}
+	return "knownhosts: key mismatch"
+}
+
+// RevokedError is returned if we found a key that was revoked.
+type RevokedError struct {
+	Revoked KnownKey
+}
+
+func (r *RevokedError) Error() string {
+	return "knownhosts: key is revoked"
+}
+
+// check checks a key against the host database. This should not be
+// used for verifying certificates.
+func (db *hostKeyDB) check(address string, remote net.Addr, remoteKey ssh.PublicKey) error {
+	if revoked := db.revoked[string(remoteKey.Marshal())]; revoked != nil {
+		return &RevokedError{Revoked: *revoked}
+	}
+
+	host, port, err := net.SplitHostPort(remote.String())
+	if err != nil {
+		return fmt.Errorf("knownhosts: SplitHostPort(%s): %v", remote, err)
+	}
+
+	hostToCheck := addr{host, port}
+	if address != "" {
+		// Give preference to the hostname if available.
+		host, port, err := net.SplitHostPort(address)
+		if err != nil {
+			return fmt.Errorf("knownhosts: SplitHostPort(%s): %v", address, err)
+		}
+
+		hostToCheck = addr{host, port}
+	}
+
+	return db.checkAddr(hostToCheck, remoteKey)
+}
+
+// checkAddr checks if we can find the given public key for the
+// given address.  If we only find an entry for the IP address,
+// or only the hostname, then this still succeeds.
+func (db *hostKeyDB) checkAddr(a addr, remoteKey ssh.PublicKey) error {
+	// TODO(hanwen): are these the right semantics? What if there
+	// is just a key for the IP address, but not for the
+	// hostname?
+
+	keyErr := &KeyError{}
+
+	for _, l := range db.lines {
+		if !l.match(a) {
+			continue
+		}
+
+		keyErr.Want = append(keyErr.Want, l.knownKey)
+		if keyEq(l.knownKey.Key, remoteKey) {
+			return nil
+		}
+	}
+
+	return keyErr
+}
+
+// The Read function parses file contents.
+func (db *hostKeyDB) Read(r io.Reader, filename string) error {
+	scanner := bufio.NewScanner(r)
+
+	lineNum := 0
+	for scanner.Scan() {
+		lineNum++
+		line := scanner.Bytes()
+		line = bytes.TrimSpace(line)
+		if len(line) == 0 || line[0] == '#' {
+			continue
+		}
+
+		if err := db.parseLine(line, filename, lineNum); err != nil {
+			return fmt.Errorf("knownhosts: %s:%d: %v", filename, lineNum, err)
+		}
+	}
+	return scanner.Err()
+}
+
+// New creates a host key callback from the given OpenSSH host key
+// files. The returned callback is for use in
+// ssh.ClientConfig.HostKeyCallback. By preference, the key check
+// operates on the hostname if available, i.e. if a server changes its
+// IP address, the host key check will still succeed, even though a
+// record of the new IP address is not available.
+func New(files ...string) (ssh.HostKeyCallback, error) {
+	db := newHostKeyDB()
+	for _, fn := range files {
+		f, err := os.Open(fn)
+		if err != nil {
+			return nil, err
+		}
+		defer f.Close()
+		if err := db.Read(f, fn); err != nil {
+			return nil, err
+		}
+	}
+
+	var certChecker ssh.CertChecker
+	certChecker.IsHostAuthority = db.IsHostAuthority
+	certChecker.IsRevoked = db.IsRevoked
+	certChecker.HostKeyFallback = db.check
+
+	return certChecker.CheckHostKey, nil
+}
+
+// Normalize normalizes an address into the form used in known_hosts. Supports
+// IPv4, hostnames, bracketed IPv6. Any other non-standard formats are returned
+// with minimal transformation.
+func Normalize(address string) string {
+	const defaultSSHPort = "22"
+
+	host, port, err := net.SplitHostPort(address)
+	if err != nil {
+		host = address
+		port = defaultSSHPort
+	}
+
+	if strings.HasPrefix(host, "[") && strings.HasSuffix(host, "]") {
+		host = host[1 : len(host)-1]
+	}
+
+	if port == defaultSSHPort {
+		return host
+	}
+	return "[" + host + "]:" + port
+}
+
+// Line returns a line to add append to the known_hosts files.
+func Line(addresses []string, key ssh.PublicKey) string {
+	var trimmed []string
+	for _, a := range addresses {
+		trimmed = append(trimmed, Normalize(a))
+	}
+
+	return strings.Join(trimmed, ",") + " " + serialize(key)
+}
+
+// HashHostname hashes the given hostname. The hostname is not
+// normalized before hashing.
+func HashHostname(hostname string) string {
+	// TODO(hanwen): check if we can safely normalize this always.
+	salt := make([]byte, sha1.Size)
+
+	_, err := rand.Read(salt)
+	if err != nil {
+		panic(fmt.Sprintf("crypto/rand failure %v", err))
+	}
+
+	hash := hashHost(hostname, salt)
+	return encodeHash(sha1HashType, salt, hash)
+}
+
+func decodeHash(encoded string) (hashType string, salt, hash []byte, err error) {
+	if len(encoded) == 0 || encoded[0] != '|' {
+		err = errors.New("knownhosts: hashed host must start with '|'")
+		return
+	}
+	components := strings.Split(encoded, "|")
+	if len(components) != 4 {
+		err = fmt.Errorf("knownhosts: got %d components, want 3", len(components))
+		return
+	}
+
+	hashType = components[1]
+	if salt, err = base64.StdEncoding.DecodeString(components[2]); err != nil {
+		return
+	}
+	if hash, err = base64.StdEncoding.DecodeString(components[3]); err != nil {
+		return
+	}
+	return
+}
+
+func encodeHash(typ string, salt []byte, hash []byte) string {
+	return strings.Join([]string{"",
+		typ,
+		base64.StdEncoding.EncodeToString(salt),
+		base64.StdEncoding.EncodeToString(hash),
+	}, "|")
+}
+
+// See https://android.googlesource.com/platform/external/openssh/+/ab28f5495c85297e7a597c1ba62e996416da7c7e/hostfile.c#120
+func hashHost(hostname string, salt []byte) []byte {
+	mac := hmac.New(sha1.New, salt)
+	mac.Write([]byte(hostname))
+	return mac.Sum(nil)
+}
+
+type hashedHost struct {
+	salt []byte
+	hash []byte
+}
+
+const sha1HashType = "1"
+
+func newHashedHost(encoded string) (*hashedHost, error) {
+	typ, salt, hash, err := decodeHash(encoded)
+	if err != nil {
+		return nil, err
+	}
+
+	// The type field seems for future algorithm agility, but it's
+	// actually hardcoded in openssh currently, see
+	// https://android.googlesource.com/platform/external/openssh/+/ab28f5495c85297e7a597c1ba62e996416da7c7e/hostfile.c#120
+	if typ != sha1HashType {
+		return nil, fmt.Errorf("knownhosts: got hash type %s, must be '1'", typ)
+	}
+
+	return &hashedHost{salt: salt, hash: hash}, nil
+}
+
+func (h *hashedHost) match(a addr) bool {
+	return bytes.Equal(hashHost(Normalize(a.String()), h.salt), h.hash)
+}

vendor/modules.txt

@@ -96,7 +96,9 @@ golang.org/x/crypto/curve25519
 golang.org/x/crypto/internal/alias
 golang.org/x/crypto/internal/poly1305
 golang.org/x/crypto/ssh
+golang.org/x/crypto/ssh/agent
 golang.org/x/crypto/ssh/internal/bcrypt_pbkdf
+golang.org/x/crypto/ssh/knownhosts
 # golang.org/x/sys v0.43.0
 ## explicit; go 1.25.0
 golang.org/x/sys/cpu